Products &
Capabilities
Many key platforms and product lines spanning bomb fuzing, missile fuzing, and precision sensors — engineered for mission-critical defense and aerospace applications worldwide.
From concept development through full-scale production, every product is designed, tested, and manufactured at our vertically integrated facility in Middletown, Connecticut.
FMU-152A/B
The FMU-152A/B is the Joint Programmable Fuze (JPF) — the standard multifunction bomb fuze for U.S. and allied air forces. Designed for both hard and soft target applications, the JPF provides selectable fuzing options across the broadest range of general-purpose and penetrator weapons in the U.S. inventory.
- Compatible with JDAM, Enhanced Paveway, and MK80/BLU-series munitions
- Multifunction capability: in-flight programmable pre-release with proximity, impact and delay modes
- Operational reliability exceeding 99%
- 10-year service life, 20-year storage life
- Deployed across F-15, F-16, F/A-18, F-22, F-35, B-1, B-2, B-52, and allied platforms worldwide
- Over 450,000 produced and delivered
FireBurst®
FireBurst® is a precision Height-of-Burst (HoB) sensor designed for laser guided bombs. Field-installable and self-powered, FireBurst® transforms standard Laser Guided Bombs (LGB) into precision airburst weapons — delivering a significant force multiplication capability without platform modification.
- Ground programmable height-of-burst from 5 to 50 feet
- Compatible with Paveway II and similar laser guided bombs
- Self-powered via integrated thermal battery — no external power source required
- Field-installable in under two minutes
- Provides significant force multiplication for surface targets
- Minimal logistics footprint with no aircraft integration required
FireLight™
FireLight™ is a miniature LiDAR-based proximity sensor engineered for precision airburst on small missiles, grenades, and unmanned aerial systems (UAS). At just 2" × 1" × 1", FireLight delivers 1-inch range precision at closing speeds exceeding Mach 1 — enabling next-generation precision effects in the smallest form factors.
- Ultra-compact form factor: 2" × 1" × 1" (tailorable depending on specific needs and space available)
- LiDAR-based ranging with 1-inch precision
- Effective at closing speeds exceeding Mach 1
- Designed for small missiles, 40mm grenades, and UAS munitions
- Low power consumption with flexible integration options
- Addresses growing demand for precision effects on unmanned platforms
FireBug™
FireBug™ is an electro-mechanical safe and arm device (EMSAD) designed for 40mm and larger munitions. Fully compliant with MIL-STD-1316 fuze safety requirements, FireBug offers both spin-setback and command arm options — providing flexible arming solutions across a range of weapon types and delivery methods.
- Designed for 40mm and larger caliber munitions
- Full MIL-STD-1316 compliance for fuze safety
- Dual arming options: spin-setback or command arm
- Electro-mechanical architecture for high reliability without software dependencies
- Scalable design supports multiple weapon configurations
- Currently at Technology Readiness Level 7 (TRL-7)
FireFly™
FireFly™ is a miniature electronic safe and arm device (ESAD) purpose-built for the emerging UAS munitions market. At under 0.035 lbs, FireFly delivers three distinct firing methods with no microprocessors or software required — reducing integration complexity while maintaining the highest levels of safety and reliability.
- Ultra-lightweight: under 0.035 lbs
- Three firing methods: low-energy exploding foil initiator (LEEFI), electric match, and direct initiation
- No microprocessors or software required — fully hardware-based safety
- Designed specifically for UAS and small munition applications
- Minimizes integration complexity for platform developers
- Currently at Technology Readiness Level 7 (TRL-7)
A Major Fuze System Producer
for U.S. Defense Systems
Precision Fuzing & Sensors brings together deep technical expertise, decades of program experience, and world‑class production and testing capabilities — trusted for proven reliability in mission‑critical environments.
Vertically Integrated Capabilities
Full design-to-delivery control under one roof — from engineering concept through full-rate production. Our Middletown, Connecticut facility houses every discipline required to take a fuzing or sensor system from initial concept through qualification, production, acceptance testing, and lifecycle support.
Engineering
Our engineering team provides full design and development services for fuzing systems, safe and arm devices, and precision sensors. From initial concept through detailed design, modeling, and simulation, our engineers leverage decades of fuzing-specific expertise.
Testing & Qualification
Comprehensive environmental, mechanical, and electrical testing to military standards including MIL-STD-1316. Our in-house test laboratories enable rapid iteration during development and full qualification testing for production programs.
Manufacturing
Precision manufacturing with tight tolerances at scale. Our production facilities support full-rate manufacturing across multiple product lines simultaneously, with capacity to deliver more than 25,000 units annually.
Quality Assurance
AS9100D certified quality management ensures mission-critical reliability on every unit we produce. Our quality system encompasses incoming inspection, in-process controls, final acceptance testing, and continuous improvement.
Production Support
Specialized logistics and sustainment services throughout the full system lifecycle. From initial delivery through long-term sustainment, our team manages packaging, shipping, spare parts, field support, and training.
Special Processes
In-house special process capabilities for the most demanding defense manufacturing requirements. These include J-Standard soldering, X-Ray, Welding, in house machining, environmental testing, and more. Our approved processes ensure quality and compliance without the delays and risks of outsourced operations.
Certifications & Compliance
Our certifications and compliance framework ensures every product meets the highest standards required by U.S. and allied defense programs.
AS9100D
Aerospace quality management system certification. Our QMS meets the rigorous requirements of the aerospace and defense industry, ensuring consistent process control, traceability, and continuous improvement across all operations.
ITAR
Full compliance with International Traffic in Arms Regulations. All technical data, products, and services are managed in accordance with U.S. Department of State export control requirements.
MIL-STD-1316
Compliance with the Department of Defense standard for fuze safety design and testing. All safe and arm devices are designed and tested to meet the requirements of MIL-STD-1316 for both development and production.
CMMC
Cybersecurity Maturity Model Certification compliance for the protection of Controlled Unclassified Information (CUI) is on track to DFARS incorporation timeline. Completed self-assessment and progressing with compliance to DFARS/NIST 800-171 timeline for information systems and processes to meet DoD cybersecurity requirements.
Ready to Discuss Your Requirements?
Our engineering and business development teams are available to discuss your fuzing and sensor requirements, provide technical specifications, or schedule a product demonstration.